Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Pompano Beach?
Panel replacement in Pompano Beach typically costs $250 – $500 per door, depending on how many sections you need, the material, and whether the panels are a standard size or a custom order. That range covers removing the damaged section and installing a new one, realigning the door so it travels cleanly, and testing the opener. Most jobs are a single section, which keeps the price at the lower end. Call (844) 840-1565 for a free estimate on your exact door.
We work on the door you have, which matters more than it sounds. A dented bottom panel on a Clopay door, a cracked section on an Amarr, a bent panel on a Wayne Dalton: we’re familiar with all of them, along with LiftMaster, Chamberlain, Genie, Craftsman, and Raynor hardware. If your opener needs attention too, that falls into the same visit. From opener remote to full installation, it’s one call.
Key Takeaways
- Single panel replacement in Pompano Beach runs $250 – $500 typical, with the written estimate setting the final price.
- A single damaged section is usually the whole job; multiple panels or custom sizes push you toward the top of the range.
- Panel work often sits on top of a related repair, like a bent track or worn rollers, so ask for those prices in the same estimate.
- Free estimates, and we can work with your insurer if you’re filing a claim.
Before we get into numbers, one thing worth saying plainly: a panel is cosmetic and structural at the same time. A section that’s bent enough to rub on the track will grind the door every time it moves, and that wear adds up to bigger repairs later. Getting a panel sorted early usually costs less than waiting. You’ll find more on the full scope of what we do on our Pompano Beach garage door repair page.
Panel Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Pompano Beach market. The final number comes from the written estimate, and it depends on the door itself, not on a chart.
| What’s involved | Typical estimated range |
|---|---|
| Panel replacement (lead range, per door) | $250 – $500 |
| Single standard panel, common size and material | $250 – $380 |
| Multiple panels or custom/cut-down sizes | $380 – $500 |
| Track realignment (often needed with a bent panel) | $120 – $240 |
| Roller replacement (often done at the same time) | $110 – $220 |
| Cable repair (if a cable is damaged) | $130 – $250 |
| Spring repair, one spring (if the spring is also failing) | $180 – $340 |
| Opener repair (if the opener is part of the problem) | $120 – $320 |
| Opener installation (new unit) | $250 – $550 |
| Full garage door repair (broader fix) | $150 – $600 |
| New door installation (if replacement makes more sense) | $700 – $2200 |
A panel price is for one panel unless the estimate says otherwise. A matched pair of springs, for example, is usually replaced together, so a pair costs about twice the single-spring range. Panel work doesn’t work that way, but multiple sections do add up, and the estimate will break out each section so you can see what you’re paying for.
What pushes the price up: an uncommon size or profile that has to be ordered, a color that needs to be matched to a faded door, or a job where the panel is damaged because the track is out of line and the track needs realignment too. What keeps it down: a standard single panel in a common material, and a door that’s otherwise in good shape so nothing else needs touching.
What Affects Panel Replacement Pricing in Pompano Beach
Six things move the number most. This is the part of a panel job people ask about most, so let’s be specific.
- Number of sections. One panel is the common case. Two or three panels replaced at once costs more in material and labor, but the per-panel cost usually drops because the door only gets taken apart once.
- Panel size and profile. Standard residential sections are straightforward. A nonstandard width or a discontinued profile has to be sourced or cut down, and that’s where a $250 job can climb toward $500.
- Material and finish. Steel sections are the most common and the least expensive. Insulated sections, wood-look faces, and doors with textured finishes cost more per panel, and matching a sun-faded color takes more care.
- Condition of the track and hardware. A panel usually bends because something hit it or because the door came off its track. If the track is out of line, it gets realigned as part of the job. That’s a separate line on the estimate, typically $120 – $240.
- Spring and cable health. Heavy doors with tired springs put more strain on panels and tracks. If a spring is failing, it’s best dealt with at the same visit rather than ignored until it snaps.
- Age of the surrounding door. On an older door, new panels can look different from the rest, and older hardware sometimes needs replacing alongside. We’ll tell you before any work starts if that’s likely.
South Florida’s climate plays into panel choice more than people expect. Doors here face a lot of sun and humidity over the years, and panels that are already faded or slightly warped can make a color match trickier. That’s a sourcing detail, not a make-or-break, but it’s why we ask for the door’s make and model early. Being factory-familiar with Clopay, Amarr, Wayne Dalton, and Raynor helps us find the right section faster than a generic outfit looking up specs on the fly. The same goes for the opener side: LiftMaster, Chamberlain, Genie, and Craftsman systems are all in our wheelhouse.
For a closer look at how a single damaged section is handled from start to finish, see our guide on panel replacement.
Is It Cheaper to Repair a Panel or Replace the Whole Door?
Repairing or replacing a single panel is almost always cheaper than a new door. A panel job typically lands at $250 – $500. A full replacement runs $700 – $2200. So unless several panels are damaged at once, or the door is failing structurally from top to bottom, panel replacement is the sensible first move.
When does replacement start to make sense? When three or more panels are damaged, when the door is out of alignment at multiple points, or when the door is old enough that matching panels is difficult or impossible. We’ll give you both numbers if it’s close, so you can decide with the facts in front of you. There’s no pressure either way.
Panel replacement or new door: which fits your situation?
- One or two damaged panels, rest of the door sound: panel replacement, typically $250 – $500.
- Three or more damaged panels, hardware worn: get an estimate for both panel work and full installation, $700 – $2200.
- Door tracks and springs at end of life too: weigh a new door against a long list of repairs.
- Want a style or material change: a new door is the only way to get that, not panel work.
How to Save on Panel Replacement in Pompano Beach
A few practical moves can keep the price near the low end of the range.
- Get it looked at before the damage spreads. A panel that’s rubbing the track wears the track and the rollers with it. Fixing the panel alone is cheaper than the panel plus a track realignment.
- Know your door’s make and model. If you have the original paperwork, have it handy. It helps us find the right panel fast, which saves time on sourcing.
- Bundle related work into one visit. If rollers or a track adjustment are due anyway, ask for them in the same estimate. One visit is cheaper than two.
- Ask for a written estimate before work starts. We give free estimates with the price in writing, so you know the number before anyone picks up a tool.
- Consider the opener at the same time. If the opener is struggling to lift a door with a bent panel, that extra strain is worth checking in the same call. Opener repair runs $120 – $320 typical.
If your panel got hit during a storm or a knock in the driveway, and you’re thinking about a claim, we can work with your insurer on the documentation. The local pro doing the work is licensed and insured as their state requires. Call (844) 840-1565 for a free estimate and we’ll take a look.
Can You Replace a Panel the Same Day?
Often, yes, for a standard panel on a common door. If the section is in stock or easily sourced, panel work is usually a same-day job. A custom or special-order panel can take a few more days to arrive, but the estimate will tell you upfront.
Spring failures don’t wait for business hours, and neither do panel problems that leave a door jammed. If a damaged panel has your car stuck, call us and we’ll get you on the schedule fast. Our goal is simple: your door is back up before you have to call in late.
FAQs – Panel Replacement Cost
Straight answers to the questions we hear most about panel pricing in Pompano Beach.
How much does panel replacement cost in Pompano Beach?
Panel replacement in Pompano Beach typically costs $250 – $500 per door. The low end is a single standard panel in a common material. The high end covers multiple panels or a custom size. Call (844) 840-1565 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door panel?
Replacing one panel, at $250 – $500 typical, is almost always cheaper than a new door at $700 – $2200. Panel replacement is the right call when the damage is limited to one or two sections. Call (844) 840-1565 and we’ll tell you which makes more sense for your door.
How much does it cost to replace multiple panels at once?
Multiple panels typically push the job toward the top of the $250 – $500 range, since more material is involved, but the per-panel labor cost usually drops because the door is only taken apart once. The written estimate breaks out each section. Call (844) 840-1565 for a free quote.
Does the cost include realigning the track and testing the opener?
The panel price covers installing the section and getting the door to travel cleanly. If the track needs realignment, that’s typically an additional $120 – $240, and it’s listed separately on the estimate. Opener testing is part of the job. Call (844) 840-1565 for a full picture.
Will a new panel match the rest of my door?
Usually, yes, if the door is a current model and the color is available. On a sun-faded door, a new panel can look a shade brighter than the rest, so we’ll flag that before ordering. Being familiar with Clopay, Amarr, Wayne Dalton, and Raynor helps us match faster. Call (844) 840-1565 to check your door’s make and model.
Get Your Panel Replaced Right the First Time
Panel replacement is one of those jobs where a careful install saves you money later. A section that’s true and square sits flush, rides the track quietly, and doesn’t drag on the rollers. Get it off by a little, and the door wears faster. We take the time to line it up and test it before we leave.
Whether you’re dealing with one dented panel, a couple of damaged sections, or a door that’s tangled with a track issue, our technicians have up to 10 years of experience with the brands you’re most likely to have: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Eight brands, one call. No handoffs, no return trips for parts.
Call (844) 840-1565 for a free estimate on panel replacement in Pompano Beach. Upfront pricing, written before we start, and same-day service wherever the job allows. If the door came down at 10 p.m. and you need help, call us anyway. That’s why we keep emergency service in the mix.
Pricing reflects the Pompano Beach market as of 2026. Pompano Beach Garage Door Repair Pros offers free estimates – call (844) 840-1565.
Written by the team at Pompano Beach Garage Door Repair Pros.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Lucia Martinez"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Shane Padgett"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Jennifer Ziegler